Stratasys Ltd. (NASDAQ:SSYS) reported first-quarter 2016 results on Monday. The macroeconomic headwinds that the leading diversified 3D printing company and rival 3D Systems Corporation (NYSE:DDD) faced throughout 2015 continued in the quarter. However, cost-cutting efforts enabled Stratasys to turn in adjusted earnings per share of $0.01 -- much better than the $0.04 loss per share that analysts were projecting, though considerably worse than the $0.04 gain in the year-ago period. Revenue declined 3% year over year to $167.9 million, slightly beating analysts' expectations of $164.8 million.
Here are four key things investors should know from the analyst conference call.
Image source: Stratasys.
1. Recurring revenue streams chugged along.
From CFO and COO Erez Simha's remarks:
Within product revenue [which increased 6% year over year], system revenue for the quarter declined by 14% over the same period last year driven primarily by the overall market weakness we discussed previously. Consumable revenue for the quarter increased 6% compared to the same period last year. [Emphasis mine.]
... Within service revenue [which increased 7% year over year], customer support revenue during the quarter, which includes the revenue generated mainly by maintenance contracts on our systems, increased by 11% compared to the same period last year driven primarily by growth in our installed base of systems.
While Stratasys' results are still weak, they clearly demonstrate the power of its razor-and-blades business model, which results in recurring revenue streams generated from its installed base of 3D printers. Its two primary recurring revenue flows are consumables (print materials) and customer support revenue, which includes maintenance contracts on systems. These revenue streams are like gravy in good times and help provide a cushion for results in challenging times. It's worth a reminder that consumables have higher-than-company-average margins.
2. Use of installed enterprise 3D printers likely increased.
From CEO David Reis' response to a question:
I think the growth in consumables is a good [indication of] the utilization of machines. [T]he ability to break down the increase in consumption between the natural growth of the installed base and the increased utilization [of already installed printers] is tough. From our analysis, we see... both increasing.
Hats off to Citigroup analyst Ken Wong for asking a question that gets at the heart of Stratasys' -- along with 3D Systems' -- primary issue since the start of 2015: a major and widespread slowdown among enterprise customers in purchasing 3D printers. Stratasys had previously attributed the tepid demand to overcapacity in the field due to the large number of printers bought during the previous few years.
Reis noted that while it's difficult to break down the consumables growth (up 6% year over year) between an increased installed 3D printer base and increased use of existing installed printers, the company's analysis points to both factors being at play. If accurate, this is encouraging news, as it means that some of the excess capacity in the field is being worked off. If this trend continues, enterprise customers will eventually need to start buying new printers.
3. The desktop category presents both an opportunity and a challenge.
From Reis' remarks:
MakerBot in the desktop category present[s] both a long-term opportunity and challenge for us, as customers increasingly choose desktop systems over high-end systems to address their concept modeling needs and in some cases also their rapid prototyping needs. We believe we are well positioned to capitalize on this opportunity and trend as we are the leader in both the professional and desktop segment of the prototyping market.
As 3D printing technology in general has advanced, so have the capabilities of desktop 3D printers, such as MakerBot's Replicator. These printers can now perform some of the functions that only enterprise-focused printers could in the past. This means that desktop printer sales are increasingly cannibalizing sales of higher-end models. However, management emphasized that it sees opportunities expanding for both MakerBot and its enterprise printer business because a greater number of entities are adopting 3D printing or are planning to expand their use of the technology.
Moreover, Stratasys sees opportunity for upselling. Management believes that a portion of customers dipping their feet into the 3D printing arena by buying a MakerBot printer will find that they eventually have needs and wants that go beyond the capability of a desktop unit.
4. More outsourcing (beyond MakerBot) is possible.
From Reis' response to a question:
So outsourcing is part of our strategy [at] Stratasys. We started in MakerBot and we are... in the process of evaluating the ROI [return on investment] and the benefit from outsourcing other activity in Stratasys.
As background, MakerBot announced last month that it had contracted with global contract manufacturer Jabil Circuit to manufacture its 3D printers. This outsourcing is a wise business move, as I've previously opined, as it provides MakerBot with the flexibility to scale manufacturing up or down based on demand without incurring the considerable fixed costs involved in running a production facility.
Stratasys' management shared on the call that additional outsourcing is on the table. This could be a good thing for the same reasons just stated with respect to MakerBot. However, Stratasys needs to be particularly careful about using other companies to manufacture its enterprise printers. Unlike 3D Systems, whose enterprise printers have experienced some quality issues relatively recently, Stratasys has a good record on this front.
The last thing it needs after the MakerBot implosion -- which was set off by widespread quality issues -- is for its enterprise printers to experience a similar scenario. But if the outsourcing and quality control procedures are done right, additional outsourcing could be a positive, as it should help improve the company's bottom line.
A secret billion-dollar stock opportunity
The world's biggest tech company forgot to show you something, but a few Wall Street analysts and the Fool didn't miss a beat: There's a small company that's powering their brand-new gadgets and the coming revolution in technology. And we think its stock price has nearly unlimited room to run for early in-the-know investors! To be one of them, just click here.
Beth McKenna has no position in any stocks mentioned. The Motley Fool recommends 3D Systems and Stratasys. Try any of our Foolish newsletter services free for 30 days. We Fools may not all hold the same opinions, but we all believe that considering a diverse range of insights makes us better investors. The Motley Fool has a disclosure policy.
Source ↔ MP3 Download Free
