"We have realized that the 3D printers on the market were very expensive for no reason," Aurélien Gaumon, one of the three engineers that comprise E-Mergin Innovations, told 3DPrint.com. "Indeed we found out that for only a few hundred euros we could build our own 3D printer with similar characteristics than printers of 2000€. So thanks to our mechanical and electronical engineering experience we have decided to make a low cost but powerful 3D printer: heat bed, PLA/ABS, 0.1mm layers automatic bed leveling and rigid frame for 399€."
The TRIUM 3D is a delta-style 3D printer with a fully aluminum frame. Although the assembly is simple, with very few parts, the printer's capabilities are many. The full metal extruder allows for the use of pretty much any type of filament you'd care to experiment with, up to 265°C. One of the most impressive features of the TRIUM 3D is its print resolution capabilities – it can go as low as 20 microns (0.02mm) per layer. The circular print bed, with a 200mm diameter and 200mm height (you can also upgrade to a 400mm height) allows for some pretty decently sized prints.
High-resolution print from TRIUM 3D
To finance the production of the TRIUM 3D, E-Mergin Innovations is attempting to raise €38,165 ($41,457) by April 12 — putting the campaign now at the halfway point with, as of the time of editing, about 60% of the goal reached. Rewards start at €15 ($16), which will get you a 3D printed keychain; a Super Early Bird contribution of €399 ($433) will get you the TRIUM 3D in kit form to assemble yourself. Assembly isn't difficult; only a few basic tools are required and it shouldn't take any more than two hours. If you want a fully assembled version, however, you can pledge €449 ($488) for a printer you can simply take out of the box and plug in. Higher donations will get you additional features, such as the increased 400mm build height.
If the campaign is fully funded, E-Mergin promises that a lot more upgrades will be coming to the the TRIUM 3D in the future, such as a diamond hotend with three extruder heads for multicolor printing, a built-in camera, and more. They're also hoping to further lower the cost of the printer.
The E-Mergin team
"In my previous job, I was reducing drastically the cost of our products and thanks to our customize design with a special made aluminum profile we are able to offer a good 3D printer with heated bed, auto bed levelling and a nice and strong aluminum frame for only 399€," Gaumon tells 3DPrint.com. "We might even reduce the cost (in the following year) according to the number of printers we can sell. This project is not lucrative. It is for us just an experience to discover enterprenership, kickstarter and marketing (which is totally new for us)."
Interested? Check out the Kickstarter video below:
